Yoyodyne Slipper Clutch 2003-2020 Honda CBR600RR
- Replace Honda part number 22120-MEE-000
The slipper clutch is designed to partially disengage or "slip" when the rear wheel tries to drive the engine faster than it would run under its own power. The engine braking forces in conventional clutches will normally be transmitted back along the transmission causing the rear wheel to hop, chatter or lose traction. Slipper clutches eliminate this extra loading on the rear suspension giving riders a more predictable ride and minimize the risk of over-revving the engine during downshifts. Slipper clutches can also prevent a catastrophic rear wheel lockup in case of engine seizure. Yoyodyne slipper clutch uses ball bearings on the ramps for superior performance to the OEM ramp on ramp design.
In order to use on 2003-2006, you must use 2007+ springs ( same as 2003-6 HRC kit ) or any aftermarket springs ( like Vesrah etc. ), which have dimension and stiffness very similar to 2007+ springs.