Yoyodyne Slipper Clutch Suzuki SV 650
- Slipper clutch fits all years of SV 650
- This unit is a direct bolt in for the newer Fuel Injected bikes. If you are installing this on an older carbed bike, you must use the clutch springs from a newer FI bike. We do not supply these springs, you must get them from your local Suzuki dealer.
- Replaces Suzuki 21411-44101
The slipper clutch is designed to partially disengage or "slip" when the rear wheel tries to drive the engine faster than it would run under its own power. The engine braking forces in conventional clutches will normally be transmitted back along the transmission causing the rear wheel to hop, chatter or lose traction. Slipper clutches eliminate this extra loading on the rear suspension giving riders a more predictable ride and minimize the risk of over-revving the engine during downshifts. Yoyodyne slipper clutch uses ball bearings on the ramps for superior performance to the OEM ramp on ramp design.
Also available as a heavy duty version of the standard SV slipper clutch, intended for higher HP motorcycles used in Supertwin and Dirt Track racing. The clutch uses an extra friction plate and steel plate for more torque capacity. Uses 2007 Honda CBR600RR springs. (included). The clutch includes a taller clutch basket to accomodate the extra clutch plates.